So far I have owned this bike for close to a month, so I will tell my thoughts about all the pros and cons I have found. The bike is easy to ride as long as you adjust the seat, oil the chain, and keep the bike maintained, you shouldn’t have too many problems with it straight out the box. It is well assembled (for the most part) and I don’t think the bike will break or disassemble on me while I ride it.
E-store info provides a complete company general and business information including locations, financials, customers’ and expert’s reviews. We utilize unique and neutral criteria for evaluating the performance of online retailers to provide customers with the most valuable information. If you think that we’ve incorrectly blocked you or you would like to discuss
easier ways to get the data you want, please file a ticket here. Try logging in or creating an account here to get back to browsing. Entice customers to sign up for your mailing list with discounts or exclusive offers.
The seat post simply slides in place, but first you should slide the light reflector on it and screw it in place. There should be a back quick release clamp that will hold the seat in place that attaches to the seat post, simply grab hold of the lever, clamp it down, and pull it tight to hold the bike seat in place. The basic rule of thumb is that the bike seat should be almost equal to the height of your waist, adjust the seat accordingly so that it is comfortable. Adjust the front brake pads by pulling the silver wire tight and holding it in place, then tighten the screw back up- You may need an extra pair of hands to do it correctly. You can tighten the tire’s nuts and the front brake’s cap by using an adjustable wrench. It loses three points for the small defects and bad customer service from the manufacturer and seller.
The Back tire isn’t fitted in place correctly and is slightly too high up on the rear tire axle shaft. It appears to be tightened in place and secure by the nut screw, but it creeps me out a bit that if the nut were to unscrew a bit the tire would fly out…. I tried to unscrew it and snap it in place, but the machine that put the nuts on really did a job and got that thing on really tight, so I decided to leave it alone. The last and probably the biggest problem was that there was no quick release for the bike seat, it was missing from the set. Even when we tried contacting both the seller and manufacturer they didn’t want to just ship a part out, they instead wanted us to ship the entire thing back and gives us a whole new bike set. That would have been fine, but we had already assembled most of the mountain bike and we didn’t want to repack the entire thing just to ship it out and get another mountain bike that we would have to reassemble.
This will be the lowest possible rate until you are logged in and enter your delivery address. Once we know your delivery address, the estimated cost will change to a final delivery cost in the order summary. The delivery hyper bike fee for your order depends on the type of product you are purchasing (in particular, the size and weight of a product). By taking innovation to the next level and creating the world’s best tires,we’re on that journey too.
So in this guide I will help walk you through assembling the mountain bike with easy to follow step by step instructions. The Hyper eRide mountain bike has been hailed as the perfect companion for younger cyclists looking to get out and explore. At an affordable price, it’s equipped with a powerful electric pedal-assist motor and a 26-inch mountain bike frame.
This cutting-edge equipment provides a great way for riders to travel faster, farther, and more comfortably than ever before. There are two nuts on the front tire, one on the left side and one on the right. Proceed to slightly unscrew both nuts on the front tire so that you can slide it hyper bike onto the front fork. Pull the brake pads out the way if you need to and slide the fork onto the tire. The Right pedal will be labeled with an “R” and the Left with an “L” sticker. If you’re running a script or application, please register or sign in with your developer credentials here.
Test the hand brakes to make sure that they work correctly for both the front and back tire. You should have two light reflectors, two pedals, the bike seat and post, as well as the quick release lever to adjust the seat, some of these items are located in a small cardboard box that comes with the set. First, slide the front reflector light onto the handlebars and tighten it up using your Philips head screwdriver. Proceed to slide the handlebars onto the bike’s body, it should slide down without any problems. If it gets stuck, adjust the rotating screw at the bottom of the handlebar so that it aligns correctly with the bike’s body and slide it in place. Do both the screw that connects to the body and the other top screw at the top of the handlebars.