Carefully unscrew the cap slightly so that the brakes will loosen up, this will allow you to easily slide the tire on. There is a plastic safety stand at the bottom of the front tire fork that you will need to first remove from the bike, grab it and pull it down to remove it. The 20IN Hyper Ultra 40 E-Bike offers great value for its price with a range of features and specs. Its durable aluminum frame and replaceable battery ensure longevity and convenience. With a powerful 250W hub-integrated motor, this e-bike is a reliable and affordable option for those looking to embrace micromobility.
Be careful removing the bike because the box has sharp staples holding it together. Some people recommend using pliers to remove the staples first, but I found it easier to just carefully pull the bike free; do which ever method works best for you. If your handlebars are tangled, proceed to rotate them around either clockwise or counter-clockwise to untangle them. Sadly I cannot give further instructions because it depends on how the handlebars tangle, but if you carefully look it over you should be able to follow the wires to straighten it all out. For those that are new to assembling mountain bikes you may find this article helpful. The instructions that comes with the Hyper Havoc FS Mountain Bike are very basic and show generalized pictures and instructions that sometimes aren’t very helpful.
Test the hand brakes to make sure that they work correctly for both the front and back tire. You should have two light reflectors, two pedals, the bike seat and post, as well as the quick release lever to adjust the seat, some of these items are located in a small cardboard box that comes with the set. First, slide the front reflector light onto the handlebars and tighten it up hyper bicycles using your Philips head screwdriver. Proceed to slide the handlebars onto the bike’s body, it should slide down without any problems. If it gets stuck, adjust the rotating screw at the bottom of the handlebar so that it aligns correctly with the bike’s body and slide it in place. Do both the screw that connects to the body and the other top screw at the top of the handlebars.
A confirmation email will be sent to inform you that your order is ready for shipping. Once you receive the confirmation, You will be able to track your shipment from the tracking number that we sent you in the confirmation email. Please don’t hesitate to contact for any further question’s and enquiries, you can contact us by email or chat or phone call. Founded in 2008, Winspace have been designing, building and racing carbon fiber bikes for over a decade. Based in Xiamen, China we have the advantage of being at the heart of the carbon fiber industry.
A few problems I found with the bike are as follows-
First, I don’t like how the handle bars are designed because you need a wrench to tighten them up and put them on. This is slightly annoying because other than the tires, everything else is assembled using hex keys (also known as an allen wrench). I would have prefered if the handlebars required Hex keys because you could use a multi-tool to quickly make adjustments while riding without needing any other items, but as it is now I always have to carry an adjustable wrench with me. The wrench built into my multi-tool is made for tires, so it is slightly too large to fit and adjust the handlebars because they used another type of bolt like screw for it. This is a minor problem because I just added a wrench to my backpack repair kit and moved along.